What Weight Jack Stand Do I Need

What Weight Jack Stand Do I Need?

A common item in almost every garage, the jack stand is a staple for auto owners. They are used for various purposes, from changing tires to completing other forms of car maintenance, especially those done under the car. 

But we are sure that the one confusion or question that has popped up multiple times when looking for a jack stand is – what ton jack stand do I need?

Jack stands are handy and great at their job. However, the different sizes can sometimes be confusing for beginners. In short, the size or weight of the jack stand depends on the kind of vehicle you will be lifting. Let us get right into the details!

Different Jack Stand Weights

Looking at it from a vast point of view, jack stand weights can range from 2 tons all the way up to 10 tons. A few models can support a whopping 25 tons, but these are not normally used in homes or small garages. 

The weight rating you will need for a particular vehicle can vary and depends mostly on the vehicle’s user manual instructions. This will provide the clearest idea of the exact jack stand weight required. 

However, if we categorize on a broader note, the table below will give you an idea.

Vehicle SizeJack Stand Weight 
Small Vehicle 2 tons (4000 pounds)
Medium Vehicle 2 tons (4000 pounds)
Large Vehicle 5-6 tons (10000 – 12000 pounds)
Truck or SUV5-6 ton (10000 – 12000 pounds)

Although this table provides us with estimated numbers, there can be many cases where it is different. This could be a small vehicle weighing a lot, or vice versa, in which case the weight of the jack stand required would also be different. 

For this reason, use the user manual as a reference point when you buy or use a jack stand for your vehicle. 

What Weight Jack Stand Do I Need

Factors To Consider When Picking the Weight of a Jack Stand

Knowing an overview of the weight ranges will not cut it when picking out the jack stands for a vehicle. There are a few other factors you also need to consider to get the right one. 

Vehicle Weight

Of course, the vehicle’s weight is at the top of the list. As discussed above, this varies with vehicles and should be cross-checked with their relevant user manuals. 

You can refer to the table above for an idea. However, remember that you will not need the maximum capacity of a jack stand if you are not planning on lifting the entire vehicle. 

A smaller jack stand (2- 4 tons) will also suffice if you only aim to lift a certain side for smaller jobs. 

Ground Clearance

Ground clearance refers to the height of the car from the ground. Some cars are lower than others and need a jack stand that provides more clearance. Regular jack stands may not fit under these cars, but there are jack stands that are 2 to 3 inches tall and can easily be moved under the car. 

Type Of Vehicle

Heavier and bulkier vehicles require more support and hence heavier jack stands. This usually means SUVs or trucks where it is recommended to use jack stands that weigh more. 

Reach

Different vehicles have different reach. For example, an SUV needs a higher reach than a smaller car. In these cases, you will have to use the maximum height provided by the jack stand. 

In case the maximum height is insufficient, you will also need to get an extension adapter. Opt for jack stands that come with their own!

Intended Use

Not everyone uses their jack stands for the same purpose. While the most common use of this tool is car maintenance, some use it to store vehicles or keep them in an inclined state. These cases will require jack stands that are heavier or have a higher weight to ensure stability. 

Quality

When picking a jack stand, check reviews of the ones you plan on buying because nothing is more important. The quality and build of the Jack Stand determine its durability and performance over time. Pick quality metals and strong builds that properly provide the support you need. 

Why Is It Important to Maintain Jack Stand Weights?

With a jack stand, you can go with the weight in three ways. It can be more than required, less than required, or just right. Let us take a brief look into these three scenarios, which will provide you with the answer to this question. 

Low Weight Rating

With a low weight rating or a jack stand with lower weight support than the car’s needs, the situation is hazardous and dangerous. In these cases, there is a high chance of the jack stand collapsing under the vehicle’s pressure. 

This will result in destroyed jack stands and a damaged vehicle and can injure anyone working on the vehicle in this condition. This is an example of a situation we want to avoid at all costs. 

High Weight Rating

Then we have the scenario where the jack stand’s weight rating is higher than required. While this may seem harmless at first, this can also be a catalyst for chaos. 

Having a jack stand with a weight rating higher than required is expensive and can cause balance problems with the car. The imbalance can then cause the vehicle to collapse. Once again something we want to avoid facing. 

Appropriate Weight Rating

Since both the higher and lower weight ratings are troublesome, the only way out of this is to get the correct weight rating for your vehicle to avoid all these hazards. 

Having the correct weight rating allows the jack stand to lift the vehicles without compromising the stability of the structure. And both of these are very important when you want to work on cars from underneath them. 

Frequently Asked Questions

Let’s answer some of the most common questions people have when utilizing a jack stand’s weight. This will help you in solving the common issues and get you prepared for a worthy purchase.

What Weight Jack Stand Do I Need for A Jeep?

For a jeep, a 6-ton jack stand will suffice for small tasks like changing a tire. This is the recommended size to travel with in case of these small needs on the road. However, if you want to lift the entire jeep, you will need one of 12 tons at least. 

Can I Use A 12-ton Jack Stand for A Truck?

The minimum weight requirement of a jack stands for a truck is around 5 to 6 tons. This is for smaller tasks like putting on a spare wheel. But when wanting to lift the whole truck, a 12-ton will be required to get the job done safely. 

How Can I Find the Weight Capacity of The Jack Stand I Need for My Car?

The weight capacity of your jack stand should be at least the same as the vehicle’s weight, or possibly more. Only then can it properly support the car and lift it up. Further instructions on this are always provided in the vehicle’s user manual, which has clearer details. 

Can I Use a Jack Stand That Has a Higher Weight Than My Vehicle?

Yes, you can. It is safe to do so. But you must also be careful to see that the placement is correct. Otherwise, it can cause an imbalance causing the vehicle to tip or slide. 

Can The Jack Stand Brand Be Different from The Jack’s Brand?

Yes, the jack stand can be of a different brand than the jack stand. What is more important to note here is that the jack stands should be rated for the vehicle’s weight and have the correct placement. The brand will not be a factor here. 

Is It Alright to Use a Lighter Jack Stand When Only Using It to Lift Part Of The Vehicle?

No, it is not. One should never use a jack stand with a lower weight than the suggested weight for the vehicle. Even if it is only to lift one side, the weight rating suggested by the vehicle manufacturer should be maintained. Otherwise, this can result in the jack stands collapsing under pressure. 

To Conclude

To answer the question of what ton jack stand you should get – there is only a partial answer. But ranges, factors, and types all come together to give you the right number. What is really important is to always appreciate the value of the weight rating.

There is a reason that number is provided by the manufacturer. No matter how many ranges you may get elsewhere, we recommend seeing that user manual for the exact number. 

The range we have provided here may be in the ballpark of that too, but when dealing with large vehicles, it is always better to be extra cautious. If you have doubts or confusion, call a professional or consult your mechanic for the best results.

Eddie Burton - Senior Author
Senior Author: Eddie Burton

Eddie Burton is a passionate car enthusiast and a seasoned mechanic with over 15 years of experience in the automotive industry. He has worked with a variety of vehicles, from classic muscle cars to modern luxury cars, and has extensive knowledge of all types of auto parts and accessories.

Eddie’s love for cars began at a young age when he would spend hours tinkering with his first car, a 1967 Mustang. Since then, he has pursued his passion for cars by working in various garages and workshops, honing his skills and expertise in everything related to automobiles.

As a contributor to our website, Eddie shares his in-depth knowledge and experience with our readers, providing valuable tips and advice on auto parts, repairs, and maintenance. He’s committed to helping car owners get the most out of their vehicles by providing honest and practical reviews of auto parts, accessories, and tools.

With Eddie’s vast experience and expertise, you can trust his recommendations and insights on everything related to cars. Whether you’re a seasoned car owner or a newbie in the world of automobiles, Eddie’s articles and reviews will help you make informed decisions and keep your vehicle running smoothly for years to come.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *